PMS-328-02 on KAMAZ-43114 chassis

ПМС-328-02

Parameters

Unit of measure

Size

Basic car KAMAZ-65115, 43114,43253
Load capacity of the cradle

kg, not more

 250

Work lifting height

m

28-0,3

Overall dimensions in the transport position

mm, not more

Length

12000

Width

2500

Height

4000

Full mass of the elevator

kg, not more

16000

Distribution of  load on the road from the gross weight of the elevator

kg, not more

on the front axle

 5550

on the rear axle (trolley)

 10450

Front overhang

mm, not more

Back overhang

mm, not more

Boom

m, not more

Turning angle of the arrow

grade

Not limited

Working pressure

MPa

16

Maximum transport speed of the elevator

km/h

 50

Supporting contour

mm, not more

5,1х4,8

Maximum rotary speed of the turning part

s-1 (rotary/min)

0,017 (1,0)

Place of management

Operator unit on the rotary part and unit in the cradle

Way of management                  Proportional
Drive                   Hydraulic
Service life                Years                 8
Additional options: a cradle with the isolators on power lines to work up to 1000V.

Turning cradle

Devices and safety devices

The elevator PB-10-611-03 equipped with the following safety devices in accordance with “Rules of devices and safety operation of elevators (towers)” :

1. Limiter of the limiting cargo (OPG).

2. Anemometer.

3. Device of orientation of the cradle in the vertical position.

4. Leveler of the system of orientation.

5. Leveler of the working zone.

6. Device of the blocking of support when the arrow works.

7. Device of the emergency lowering of the cradle.

8. Devices which protect the external support from the spontaneous promotion.

9. Indicator of the slope angle of the elevator.

10. Emergency stop of the engine from the panel on the rotary frame and from the cradle.

11. Two control panels which allow managing of all operations of the elevator.

12. Delivery of the sound signal from all panels.

Devices and safety devices work to switch off the movement of the elevator without switching off the power plant.

News

ОАО "СММ" осуществляет услуги плазменной и газокислородной резки металла, в т.ч. из давальческого металла.

Технические характеристики:
-размер рабочей зоны 2000х12000
-толщина реза 2-200 мм
-отклонение от габаритного размера детали 0,5 мм на длине L=6000мм

Услуги по покраске различных деталей, узлов, оборудования, с/х и строительной техники с использованием сушки с применением всего спектра лакокрасочных материалов с габаритами покрасочной камеры LхDхH 12500х5500х4500

Услуги по дробеструйной очистке поверхностей с использованием дроби ф=1мм