EO-2621
EO-2621
Excavator bulldozer EO-2621 the production of JSC “Pinskiy Zavod Sredstv Maloy Mechanizatcii” is designed taking into account the best achievements of home and foreign machine building. It is equipped with hanging excavator equipment and universal bulldozer. It is used to fulfill ground, excavator and load and unload works on the ground of the 1st and 2nd categories. It is better than analogical models of the CIS countries according to the technical characteristics and manufacturability. The high productivity of the excavator bulldozer combines with the ease of management, the safety in working and the simplicity in service.
Hydraulic System
Modern sectional hydraulic control valve with the safety and cavitation valves by the firm “ Hidrocontrol “ (Italy) provides smooth combination of operations of excavator equipment and his exact work. It protects the excavator bulldozer from the mechanical damage when the operator mistakes. There is a possibility to quickly install the sections for additional equipment.
Management organs are situated on the distance of the arm’s length. Two four-position levers of smooth and exact managing of the working equipment of reverse shovel with the opportunity to combine the operations are situated on the back control panel. Management of the excavator equipment is performed by two joysticks which are situated on the lateral control panel under the right hand of operator.
The area of application of the excavator bulldozer EO-2621 extends. The excavator completes with additional changeable kinds of equipment and organs which are used in the construction of the basic machine. There are different variations of the complete set of the excavator bulldozer with the changeable work organs on request of the Buyer (the Consumer) and in agreement of the Producer.
Technical Characteristics of the Excavator Bulldozer EO-2621
| Parameters |
Unit of measure |
Size |
| Basic car –tractor “Belarus”, modification of MTZ-82P | ||
| Operational weight |
kg |
6300+100 |
| Overall dimensions in the transport position | ||
| Length |
mm |
7700±100 |
| Width |
mm, not more |
2400 |
| Height |
mm |
3800±100 |
| Maximum transport speed |
km/h |
18,0-0,3 |
| Minimum turning radius with the hanging equipment in the transport position |
m, not more |
6,3 |
| Overcoming slope of the firm dry way |
º, not less |
13 |
| Road clearance |
mm, not less |
190 |
| Pressure in the hydro system of the excavator bulldozer which is limited by the safety valves of hydraulic control valves |
МPа (kgs/sm2) |
16±1 (160±10) |
| Width of the grab of the bulldozer |
Mm |
2290 |
| Hanging excavator equipment: |
|
|
| Type of equipment –reverse shovel | ||
| Nominal capacity of the dipper |
m3, not less |
0,28m3 |
| Width of the dipper according to the cutting hem |
mm, not less |
550 |
| The greatest deep of digging |
mm, not less |
3900 |
| The greatest radius of digging |
mm, not less |
5200 |
| The greatest height of unloading |
mm, not less |
3500 |
| The length of the working cycle (in the greatest deep of digging) |
s, not more |
25 |
|
Additional equipment ( on order for separate price): |
||
| Narrow dipper: |
|
|
| Nominal capacity of the dipper |
m3, not less |
0,1m3 |
| Width of the dipper |
mm, not less |
310 |
| Additional dipper: |
|
|
| Nominal capacity of the dipper |
m3, not less |
0,26m3 |
| Width of the dipper |
mm, not less |
675 |
| Hydraulic hammer HM-120 |
|
|
| Frequency of the kicks |
g/min, not less |
720 |
| Energy of the kicks |
J, not less |
500 |
