PMS-328

ПМС-328

Parameters

Unit of measure

Size

Basic car

MAZ- 337

Load capacity of the cradle

kg, not more

250

Work lifting height

m

28

Overall dimensions in the transport position

mm, not more

Length

12000

Width

2500

Height

4000

Full mass of the elevator

kg, not more

14700

Distribution of  load on the road from the gross weight of the elevator
on the front axle

kg, not more

5840

on the rear axle (trolley)

8860

Front overhang

mm, not more

3290

Back overhang

mm, not more

5100

Boom

m, not more

13,8

Turning angle of the arrow

grade

Not limited

System of management

Electro-proportional

Drive

Hydraulic

Minimum radius of the turn

m

8,4

Maximum angle of lifting overcoming by the elevator

%

17

Maximum transport speed of the elevator

km/h

50

Supporting contour

m, not less

5,1 х 4,8

Maximum slope angle of the working platform

grade

3

Maximum permissible air speed at work (at a height of 10 m)

m/s

10

Place of management

Operator unit on the rotary part and unit in the cradle

Additional options: a cradle with the isolators on power lines to work up to 1000V.

Turning cradle

Devices and safety devices

The elevator PB-10-611-03 equipped with the following safety devices in accordance with “Rules of devices and safety operation of elevators (towers)” :

1. Limiter of the limiting cargo (OPG).

2. Anemometer.

3. Device of orientation of the cradle in the vertical position.

4. Leveler of the system of orientation.

5. Device of the blocking of support when the arrow works.

6. Device of the emergency lowering of the cradle.

7. Devices which protect the external support from the spontaneous promotion.

8. Indicator of the slope angle of the elevator.

9. Emergency stop of the engine from the panel on the rotary frame and from the cradle.

10. Two control panels which allow managing of all operations of the elevator.

12. Delivery of the sound signal from all panels.

Devices and safety devices work to switch off the movement of the elevator without switching off the power plant.

News

ОАО "СММ" осуществляет услуги плазменной и газокислородной резки металла, в т.ч. из давальческого металла.

Технические характеристики:
-размер рабочей зоны 2000х12000
-толщина реза 2-200 мм
-отклонение от габаритного размера детали 0,5 мм на длине L=6000мм

Услуги по покраске различных деталей, узлов, оборудования, с/х и строительной техники с использованием сушки с применением всего спектра лакокрасочных материалов с габаритами покрасочной камеры LхDхH 12500х5500х4500

Услуги по дробеструйной очистке поверхностей с использованием дроби ф=1мм