PMS-22
| Parameters |
Unit of measure |
Size |
| Basic car |
MAZ-437137, MAZ-457043 |
|
| Wheelbase of the chassis |
Mm |
3700 or 4200 |
| Load capacity of the cradle |
Kg, not more |
250 |
| Turning of the cradle |
Grade |
±45 |
| Working height of the elevator |
M |
22+0,5 |
| Overall dimensions in the transport position |
mm, not more |
|
| Length |
10500 |
|
| Width |
2500 |
|
| Height |
3950 |
|
| Full mass of the elevator |
kg, not more |
10050 |
| Distribution of load on the road from the gross weight of the elevator |
kg, not more |
|
| on the front axle |
3750 |
|
| on the rear axle (cradle) |
6300 |
|
| Front angle of the overhang |
Grade |
21 |
| Back angle of the overhang |
Grade |
12 |
| Boom |
m, not more |
11,5 |
| Turning angle of the arrow |
Grade |
360(not limited) |
| Turning angle of the cradle |
Grade, not less |
45 |
| Time of the lift of the cradle on the largest height |
S, not more |
300 |
| Maximum transport speed of the elevator |
km/h |
60 |
| Supporting contour |
m, not less |
5,2 х 4,45 |
| Maximum speed of the rotary part |
s-1 (rotary/min) |
0,017 (1,0) |
| Working pressure in the hydraulic system of the elevator |
MPa, not more |
16 |
| Controlling the fuel consumption when the elevator works |
l/car,-h, not more |
7,8 |
| Drive |
Hydraulic, Chassis from PTO |
|
| Place of management |
Operator unit on the rotary part and unit in the cradle |
|
| Way of management |
Electro-proportional |
|
| Service life |
years |
8 |
